Variations of Pivots

1-1/2" Offset Pivots

• All offset pivot sets are handed
• The pivot point of an 1 1/2˝ offset pivot is 3/4˝ (19.1)mm from the heel and 1˝ 1/2 (38.1)mm from the face of the door
• 1 1/2˝ offset pivots allow additional clearance to accept various trim conditions
• 1 1/2˝ offset pivots allow fascia to be applied to the face of a standard 1 3/4” (44.5)mm door
• Door edges must be beveled 1/8˝ (3.2)mm for every 2˝ (50.8)mm of door thickness
• Offset pivots allow the door to be weathertight at both sides and the top using the stops